PLC Touch Screen Small Flat Vulcanizing Machine For PE Plastic 5-30 Ton Capacity

Small Flat Vulcanizing Machine / Device / Equipment / Apparatus / Instrument for PE Plastic

1.Introduction

This series of flat vulcanizing machines are used in the main equipment for pressing and forming various rubber model products and non-model products. They can also be used to suppress all kinds of thermosetting plastics and foaming rubber and plastic products. With independent power mechanism and electrical system, centralized control with buttons. The working pressure and heating temperature can be adjusted within a certain range. This model is divided into manual and semi-automatic.

2.Technical Specification

1).Capacity: 5-30ton (adjustable)

2).Temperature range: normal temperature ~ 250 ° C

3).Temperature accuracy: ± 0.5 ° C

4).Temperature controller: PLC touch screen

5).Temperature control mode: PLC touch screen

6).Heating: electric heating tube heating

7).Working mode: electric heating. Heating method: electric heating.

8).Heating time: about 15min from room temperature to 160 °C (heating speed adjustable)

9).Timer: PLC display, 0.01S ~ 999min ~ 999hr (adjustable)

10).Hot plate: 350 × 350mm (specially treated high hardness steel plate) electric heating water cooling.

11).Exhaust function: low pressure automatic exhaust one minute 3 to 10 times adjustable

12).Hydraulic system: proportional hydraulic flow closed loop control system, GPY oil pump (made in Japan) drives high-performance electro-hydraulic with high-precision non-resistance cylinder piston to perform equal-rate control mode (stroke height can be set independently) with automatic pressure Compensation function, pressurization time can be preset, load force is strong, lifting is stable, automatic pressurization, pressure holding, pressure relief

13).Cylinder stroke: Max 300mm

14).Cylinder speed: 11mm / s

15).Pressure table: 0 ~ 200kg / sq.cm

16).Volume: (W × D × H) 1400 × 750 × 1460 mm

17).Power: 3 ∮, AC220V, 15A

18).Weight: about 350kg

3.Operation Method

1). First adjust the test machine horizontally, and use the level on the base of the machine, and adjust the basic screw according to the level indicator to make it level (adjust when installing the machine or moving the machine).

2). Start the main power switch and let the power supply pass through the control panels of the machine.

3). Set the test temperature.

4). Set the temperature of the upper, middle upper, middle lower and lower molds according to the requirements of the materials. After the temperature reaches the set temperature, open the cylinder door and place the stainless steel plate and the sample.

5). Start the test button to start the test on the hydraulic cylinder (do not adjust the pressure and speed of the hydraulic system).

6). The system automatically resets after the set time is reached.

7). Observe the sample and the test is over.

Since it was established in 2002,Daho Meter has been specializing in density testing field on developing, innovating and producing. and has been devoting to provide densimeter with high precision, easy operation and good durability. Nowadays it is the most well-known professional densimeter brand in China after got great efforts for decades. It is the one can support a wideness of field including solid, porosity solid, powder, liquid., etc and other testing program related to density.

Daho Meter is the brand that has the largest market share in China, along with the best quality and the ability to provide the completed service, we are expanding the business to abroad.

Core competitiveness is the soul of brand to survive and develop. what is the utmost advantage of Daho Meter is professional, technology, quality and service. we understand deeply that the key to win market is based on the satisfaction of customers, therefore, professional technology, reliable quality and in-time service would be the necessary elements that service customers better. On the other hand, Daho Meter carry out the management philosophy completely which is “customer priority ,quality first ,service winning”and the service spirit which is “quick response, reliability, thoughtfulness”

The ability to serve and service station is the mirror to show strength of brand. as well it is the visible tool to support customers. Daho Meter pay much attention to the training staff about technology to make sure customers would get the reliable products and service. also ensure the ability to get through the whole process, such as technical consultation, business handling, installation and debugging, after-sales service., etc. Daho Meter set up 4 different customer service center around in China, they are located respectively in Dongguan, ShenZhen, BeiJing, and HangZhou. In Dongguan, we built the Testing Center in Aug.2013.All in all, what we did is to make improvement on quality service to meet all kinds of customers’demands.

As the pursue for excellent quality and considerate service, Daho Meter’s brand is getting stronger and stronger step by step through serve customers beyond their expectation. Gradually market speak well of this brand. and finally customers place dependence on it. With this kind of help, Daho Meter advance in the forefront of the density filed.

Future depends on where we stand, innovation can make dream came true. the goal Daho Meter is about to hit is to become the global leader of densimeter brand. we will stick on the professional road, keep the pragmatic and pioneering spirit,to provide support to improve analyzing testing precision for all industries and make contribute to sustainable development for society, also make our pygmy effort for “China's Dream”as well.